|
The SSM® series have stainless steel meter bodies, tested and certified to NSF/ANSI 372 for lead free compliance and meet or exceed AWWA specifications. The SSM® Multi-Jet meter has a long meter life and good tolerance to contaminants. The series is well suited for industrial, commercial and residential applications. The dry sealed registers are easy to read and will retain their clear view display. The SSM® series meter is available in sizes from ⅝” x ½” to 2” with maximum flow rates up to 160 GPM and pressures up to 150 psi. Registrations are available in gallons, cubic feet, or liters/cubic meters. The SSM® meter is a totalizing multi-jet meter for those applications that only need to read the totalized flow at the meter. The SSMRS® which is equipped with a reed switch for a dry contact electrical output.
Offering These Advantages
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Meter Connection: | Carlon Supplies necessary connections with all SSM/SSMR orders. |
| Pressure Rating: | Do not exceed 150 p.s.i. |
| PH Level Range: | 6.5 – 8.0 |
| Temperature Range: | Protect the meter from freezing and within the temperatures of 35 to 122deg F |
| Accuracy: | +/- 1.5% of maximum flow when operating between minimum and maximum flow range |
| Remote Counter Housing: | NEMA-1 |
| Remote Counter Dimensions: | Depth 3 1/2″, Width 2 1/2″, Height 1 3/4″ |
| Remote Counter Display: | Liquid Crystal, 8 digit, .315″ high |
| Remote Counter Units: | Digital Remote Counter will coincide with the total volume shown on meter register, except for the 1 1/2″ and 2″ Metric size remote counters read 10 times the meter’s total volume accumulated. |
Selector chart of Residential & Commercial Meters (*)
| Meter / Pipe Size |
Model* | Pipe & Tailpiece Size |
Connection Length[x2] | * Continuous Flow |
Flow Range (GPM)
|
Length
|
Height
|
Width
|
Weight
in Lbs. |
|
5/8″ x 1/2″ thd
|
625SSM
|
1/2″ NPT | 2″ |
8 GPM
|
1/4 – 20
|
7 1/2″
|
4 1/4″
|
3 5/8″
|
3.3
|
|
5/8 x 3/4″ thd
|
6251SSM
|
3/4″ NPT | 2″ |
10 GPM
|
1/4 – 20
|
7 1/2″
|
4 1/4″
|
3 5/8″
|
3.3
|
|
3/4″ x 3/4″ thd
|
750SSM | 3/4″ NPT | 2″ |
15 GPM
|
1/2 – 30
|
7 1/2″ |
4 5/8″
|
3 7/8″
|
3.4 |
|
1″ thd
|
1000SSM | 1 ” NPT | 2 1/4″ |
25 GPM
|
3/4 – 50 | 10 1/4 |
4 5/8″
|
3 7/8″
|
5.7 |
|
1 1/2″ thd
|
150SSM | 1 1/2″ NPT | 2 1/2″ |
50 GPM
|
2 – 100
|
11 7/8″
|
5 1/2″
|
4 7/8″
|
10.6 |
|
2″ thd
|
200SSM
|
2″ NPT | 2 3/4″ |
80 GPM
|
2 – 160
|
11 7/8″
|
5 1/2″
|
4 7/8″
|
13
|
*For specifying Digital Remote Counter type meters, add an R to the SSM model numbers above to receive the SSMR meter, 25 feet of wire, and a remote counter.
*The size of the meter selected should be based upon continuous flow, GPM, as opposed to pipe size. For example, if it is determined that continuous flow is 25GPM, a 1″ meter should be selected rather than a 3/4″ meter.
